Collection

Linndrum power supply board

The Dtronics LinnPSU for linndrum gives you more stability, reliability and less heat.
The high-end onboard voltage regulator produces a clean and stable output.
There are 2 potmeters on board to adjust the main voltage an

MCIVU2 Dual VU meter with LED phase correlation and analog MCI vu meters

Brand new unit with classic re-used MCI meters from the early 80's
Custom made, only 5 units ever made.

TRS (balanced) inputs on the back. 9VDC power adapter included.

Dtronics DT-800 programmer Roland PG-800 clone for JX8-p , JX10 and MKS-70 synthesizer

Dual 4 x XLR Input & 4 x XLR Output > D-sub
DB25XLR 8 x XLR Input > D-sub and 8 x XLR Output > D-subDTOX-16 I/O connects 8 XLR inputs to a D-sub 25-pin
connector and 8 XLR outputs to another D-sub 25-pin connector.
Supports all interfaces using an anal

16 x XLR/TRS COMBO Input to 2 x D-sub
DB25XLR-JF connects 16 XLR/TRS COMBO inputs to two D-sub 25-pin connectors (channels 1-8 and channels 9-16).
Supports all interfaces using analog 25-pin D-sub inputs with TASCAM DB-25 pinout standard.

16 x XLR Output 2 x D-sub
DB25XLR-M connects 16 XLR outputs to two D-sub 25-pin connectors (channels 1-8 and channels 9-16).
Supports all interfaces using analog 25-pin D-sub inputs with TASCAM DB-25 pinout standard.

8 x XLR Input > D-sub and 8 x XLR Output > D-sub
DB25XLR-F-M 8 x XLR Input > D-sub and 8 x XLR Output > D-subDTOX-16 I/O connects 8 XLR inputs to a D-sub 25-pin
connector and 8 XLR outputs to another D-sub 25-pin connector.
Supports all interfaces usin

8 x XLR/TRS COMBO Input > D-sub and 8 x XLR Output > D-sub
DB25XLR-JF-M 8 x XLR/TRS COMBO Input > D-sub and 8 x XLR Output > D-subDTOX-16 I/O connects 8 XLR inputs to a D-sub 25-pin connector and 8 XLR outputs to another D-sub 25-pin connector.
Supports

DB25XLR Female Breakout
16 x XLR Input to 2 x D-sub
DB25XLR-F connects 16 XLR inputs to two D-sub 25-pin connectors (channels 1-8 and channels 9-16).
Supports all interfaces using analog 25-pin D-sub inputs with TASCAM DB-25 pinout standard.

With this solution developed in the Netherlands, you can convert a midi signal from almost any DAW to a relay circuit. A commonly used application is e.g. switching on a recording light as soon as your DAW goes into recording. In addition, the DT-MTC has

Powersupply Universal 9V for DT300

Powersupply US 9V for DT300